Free loft survey
We inspect the full loft or cavity with a boroscope inspection camera and moisture meter, photograph every affected area, and give you a fixed written price the same day. No call-out fee and no obligation to book.
Every removal includes a free survey, fixed written price, full extraction, timber treatment, waste disposal and a completion report. We do not charge extra for access equipment or clean-up. Cavity wall extraction and replacement insulation are quoted separately after a survey.
We inspect the full loft or cavity with a boroscope inspection camera and moisture meter, photograph every affected area, and give you a fixed written price the same day. No call-out fee and no obligation to book.
We remove all open cell and closed cell spray foam from rafters, roof deck and eaves using reciprocating saws, oscillating multi-tools and an industrial vacuum extractor. Every timber is checked as we go.
Any rafter showing signs of rot or high moisture gets treated with a preservative, and damaged sections are replaced. We confirm moisture readings are below 20% before we close the job.
All foam waste is bagged and removed by licensed carriers. You get waste transfer documentation with your completion report, which matters if you are selling the property or dealing with a lender.
You receive before-and-after photos, moisture readings, timber treatment records and a PAS 2035 aligned summary. Surveyors, solicitors and lenders accept this pack without follow-up queries.
Spray Foam Removal near me in Clacton on Sea is the controlled extraction of polyurethane foam from lofts, rafters, roof decks and cavity walls, followed by timber treatment and reinstatement of ventilation. We use an industrial vacuum extractor, reciprocating saw and oscillating multi-tool to cut foam back to the timber without tearing the felt or vapour barrier. Every rafter is checked with a boroscope inspection camera and moisture meter before we sign the job off.
Most Clacton on Sea calls come from homeowners who have hit a mortgage refusal due to spray foam, or who have spotted condensation in loft spaces and damp from spray foam insulation trapped against the rafters. Coastal properties in Holland-on-Sea and Jaywick suffer more because of driving rain off the North Sea. If you search for local spray foam removal Clacton on Sea Essex, we cover the whole district, including Great Clacton and St Osyth, with same-week bookings.
Every job follows the same five steps, from first phone call to final clean-up. You get a fixed price before we start and a written report when we finish.
Schedule
Call or book online — a real human picks up and confirms a 2-hour arrival window.
Diagnose
Licensed tech inspects on-site, then walks you through the cause and your options.
Fix
The job is completed to code and done right the first time — no shortcuts, no surprises.
Guarantee
Every job backed by a written workmanship warranty — and we stand behind it.
Industrial vacuum extractor
Pulls foam waste directly from the cut point into a sealed container, keeping dust out of your living space and speeding up removal on large lofts.
Reciprocating saw
Cuts through closed cell foam and stubborn sections where hand tools will not work. We use fine blades to avoid tearing felt or vapour barrier.
Oscillating multi-tool
Precision cutting around rafters, wiring and pipework where a reciprocating saw would be too aggressive. Essential for clean extraction near junction boxes.
Boroscope inspection camera
Lets us inspect behind foam, inside cavity walls and along roof decks without opening up the structure. We photograph everything for your report.
Moisture meter
Measures timber moisture before, during and after removal. We confirm readings are below 20% before we sign the job off.
Air scrubber
Filters airborne dust and particles during extraction. We run one continuously whenever we are cutting foam inside a property.
PPE respirator
Protects our technicians from foam dust and fibres. We wear full PPE on every job, no exceptions.
PAS 2035 aligned removal
We follow PAS 2035 principles for insulation removal and reinstatement, which means documented assessment, correct ventilation restoration and a completion report that lenders and surveyors accept.
Dry ice blasting
For delicate surfaces and hard-to-reach areas, we use dry ice pellets to freeze and lift foam without abrasion. Ideal around wiring and pipework where cutting tools are too risky.
Abrasive blasting
On masonry and brick, we use controlled abrasive blasting media to remove foam residue that hand tools cannot shift. Full containment keeps dust out of your property.
Thermal removal
Heat softens the bond between foam and substrate, making extraction cleaner on fragile timbers. Slower than mechanical removal but safer on older roof structures.
01
What we do: We survey within 24 hours, remove the foam in a single visit, and supply the completion report your buyer's solicitor needs. We work to your deadline, not ours.
→ The sale proceeds without further negotiation on the roof, and you have documented evidence for your records.
02
What we do: We carry out a full removal, treat any affected timber and provide a lender-ready report with moisture readings and photos. We have done this hundreds of times across Essex.
→ Your lender accepts the report and the remortgage completes, usually within three weeks of the work finishing.
03
What we do: We inspect with a boroscope and moisture meter, remove the foam, treat the timber and restore ventilation. We also check for cavity wall bridging while we are on site.
→ The loft dries out, condensation stops forming, and the timber is protected against further rot.
04
What we do: We schedule the removal for the week you complete, work around your movers, and hand back a clean loft with a full report. No fuss, no mess left behind.
→ You move into a property with a clear loft, restored ventilation and paperwork that keeps your mortgage safe.
Clacton on Sea sits on the Essex coast, and that changes how foam behaves. Driving rain off the North Sea pushes moisture into roof spaces, and foam sprayed directly onto rafters traps it there. We see more timber rot in Holland-on-Sea and Jaywick than inland because of the coastal exposure. The building stock is mixed: Victorian terraces in Clacton Town Centre, 1930s semis in Great Clacton, and post-war bungalows along the seafront. Each needs a different approach. If you are searching for spray foam removal near me Clacton on Sea Essex, we know which lofts have felt that tears easily and which have brittle rafters that need thermal removal rather than sawing. We also handle cavity wall spray foam removal, which is common in the older terraces where foam was injected years ago. Every job gets a moisture survey first, because guessing costs you timber. We work to PAS 2035 standards and supply reports that local surveyors and lenders accept without argument.
Holland-on-Sea
Coastal exposure means foam here traps more moisture than inland. We check eaves ventilation carefully and often find rot on the windward side of the roof.
Great Clacton
Mostly 1930s semis with shallow lofts. Access is tight, so we use compact extraction kit and cut foam in smaller sections to avoid damaging the felt.
Clacton Town Centre
Victorian terraces with original rafters. These need thermal removal rather than sawing, because the timber is old and brittle.
Jaywick
Bungalows and chalets with low-pitch roofs. Foam often bonds to the roof deck here, so we use boroscope inspection before quoting to check the extent.
St Osyth
A mix of older cottages and newer builds. We see cavity wall foam here more than anywhere else, which needs a separate survey and extraction plan.
Coastal driving rain and salt air
Foam traps moisture against rafters faster than inland, so rot sets in within two to three winters. We treat timber as standard on every coastal job.
Older building stock with brittle rafters
Victorian and 1930s timbers can split under sawing, so we switch to thermal removal or dry ice blasting where the structure is fragile.
Shallow loft spaces
Tight access in Great Clacton and Jaywick means we use compact extraction kit and cut foam in smaller sections to avoid damaging felt or wiring.
Cavity wall foam injected years ago
Common in Clacton Town Centre terraces. We survey with a boroscope, extract through drilled access points and make good the walls afterwards.
Foam insulation causes more problems than it solves when it is sprayed directly onto timber. Here are the issues we fix most often for Clacton on Sea homeowners.
Problem
Lenders class foam-sprayed roofs as unmortgageable, which stalls sales and remortgages for months.
Our Fix
We remove the foam, treat the timber and supply a lender-ready report with photos and moisture readings. Most Clacton on Sea clients get their mortgage offer within three weeks of completion.
Problem
Trapped moisture soaks into rafters and roof deck, causing rot, mould and a failed building survey.
Our Fix
We cut the foam back, dry the timber, treat it with preservative and restore eaves ventilation. Moisture readings typically drop below 60% within a week of removal.
Problem
Blocked ventilation causes condensation to form on cold surfaces, dripping onto stored items and ceiling joists.
Our Fix
We clear the full eaves run, check the vapour barrier and reinstate cross-flow ventilation. Most lofts stop forming condensation within days of the foam coming out.
Problem
A failed survey due to spray foam can knock thousands off a sale price or kill a deal entirely.
Our Fix
Our documented removal with before-and-after photos and a PAS 2035 aligned report gives buyers and solicitors the evidence they need to proceed with confidence.
Trapped foam causes timber rot, failed surveys and mortgage refusals across Clacton on Sea. Removing it restores airflow, protects the structure and gets lenders back on side.
Unblock mortgage valuations
Lenders routinely refuse mortgages on properties with foam sprayed directly onto roof timbers. We remove the foam, treat the rafters and provide a completion report that satisfies surveyors and lenders. Most Clacton on Sea jobs are signed off within 48 hours of the final inspection.
Stop timber rot early
Closed cell spray foam traps moisture against rafters and roof deck. In coastal Essex that means rot sets in within two to three winters. Our moisture meter readings before and after removal show the difference, and we treat every affected timber with a preservative before closing the job.
Restore loft ventilation
Foam blocks the eaves gap and kills cross-flow ventilation. We clear the full run, check the vapour barrier and reinstate airflow so condensation in loft spaces stops forming. Most lofts see humidity drop from above 75% to below 60% within a week of removal.
Protect property value
A failed building survey due to spray foam can knock thousands off a Clacton on Sea sale. A documented removal with before-and-after photos and a PAS 2035 aligned report gives buyers and solicitors the evidence they need. We supply the full pack as standard on every job.
Google ★★★★★4.9
Surveyed on a Tuesday, foam removed on the Thursday, report in my inbox by Friday. The lender accepted it without a single question. Clean, tidy and they knew exactly what they were doing.
Google ★★★★★5.0
We had foam in the loft for years and did not realise it was causing the damp. They showed us the moisture readings before and after. The difference was obvious. Fair price and no mess.
Checkatrade ★★★★★4.8
Booked them for a cavity wall foam removal in Clacton Town Centre. They explained everything clearly, worked around our schedule and made good the walls afterwards. Would recommend to anyone.
Google ★★★★★5.0
Needed spray foam removal near me open now because of a last-minute surveyor visit. They fitted us in the next morning and had the loft cleared by lunchtime. Report was with us the same day.
We have been removing spray foam insulation since 2022, working on lofts, rafters and cavity walls across Clacton on Sea and the wider Essex coast. Our team holds TrustMark registration, CHAS and SafeContractor accreditation, and we work to PAS 2035 standards on every job. We have completed hundreds of removals for homeowners, landlords and mortgage lenders, including complex cases where foam has bonded to felt, wiring or roof deck. We know the difference between open cell and closed cell foam on sight, and we know what surveyors and lenders want to see in a completion report.
Real answers to the questions we hear most often from local homeowners and property managers.
If you have a surveyor booked or a mortgage deadline, our same-day service gets a technician to your Clacton on Sea property within hours. We carry extraction kit on board and can start work the moment you approve the fixed price.
View same day Spray Foam RemovalFor urgent cases, including water ingress after a storm or a lender deadline that cannot wait, we run 24/7 Spray Foam Removal across Clacton on Sea and Essex. Call any time and we will tell you exactly when we can be on site.
View 24/7 Spray Foam RemovalMost of our Clacton on Sea work is residential: lofts, rafters, roof decks and cavity walls in houses and bungalows. We protect your home with dust barriers and air scrubbers, and we clean up fully before we leave.
View Residential Spray Foam RemovalWe remove spray foam from warehouses, workshops and commercial units across Essex. Work is scheduled around your operating hours, and we provide method statements and risk assessments before we start on site.
View Commercial Spray Foam RemovalLoft spray foam removal is our most common Clacton on Sea job. We cut foam back to the rafters, treat any rot, restore ventilation and hand back a clean, usable loft with a full completion report for your records.
View loft spray foam removalFoam sprayed directly onto roof deck traps moisture and causes rot fast on the Essex coast. We remove it in sections, inspect the deck with a boroscope, and replace any damaged boards before reinstating the vapour barrier.
View roof spray foam removalCall us on 0333 567 2543 between 08:00 and 18:00, Monday to Friday, and you will speak to someone who has actually been up a Clacton loft this month. Out of hours, leave a message and we will call you back first thing. For surveys, quotes and documentation requests, email [email protected] and we will reply the same working day.
Phone
03335672543Address
72-78 Rosemary Rd, Clacton on Sea CO15 1TZ, UK, Clacton on Sea, Essex
Hours
Mon–Fri: 7AM – 7PM
Sat: 8AM – 4PM
Sun: Emergency Only
24/7 Emergency Available